Love | Fate | Destiny

Place blank on stamping block. Position Metaphysical Ultra Detail Design Stamp on the blank. Use the Tilt & Tap technique to stamp 6mm and larger stamps, or stamps with more details. While applying pressure to the stamp, strike once with medium force. Then without lifting stamp, continue to strike while very slightly tilting the stamp in a circular motion to catch all sides of the design.

TIP: If the stamp has an ImpressArt logo, make sure it is facing you so that the impression is stamped in the correct direction.

TIP: Use stamp tape to secure the blank to the stamping block so it doesn’t move while stamping.

Note: Harder metals and stamps with more detail require a harder strike than softer metals and stamps with less detail.

Continue to build your own metaphysical comic connection design by playing with the placement of complementary ultra detail and other stamps. Use straight and circle guides to assist in design alignment and spacing.

Highlight impressions with Stamp Enamel. Wait 3-5 minutes and then dab the excess enamel into the impressions with a paper towel before lightly wiping it away from the surface of the blank.

Buff stamped blank to a brilliant, high-shine finish using High Polish Finish Blocks. Use fine grit to quickly clean and polish blanks. Hold buffing block in the palm of the hand and move the block in even, back and forth strokes to remove dirt and dried enamel left on the raised surfaces. Use extra fine grit for buffing to a high shine. Hold buffing block in the palm of hand and buff in tiny, back and forth strokes with light pressure to get a mirror-like shine.

Use the tips of two chain nose pliers to grasp the sides of a jump ring, with the opening of the jump ring facing up between the two pliers. Laterally twist each side of the jump ring in opposite directions to open the ring. Slide blank onto jump ring, and drape chain over the open ring. Laterally twist the jump ring back with tension to close. Close chain to complete necklace.